產品介紹
產品定位：Anritsu MP1763C 屬於光通訊、光譜分析與光學量測設備，可用於光纖通訊、光譜分析、雷射／光源驗證、光模組與光元件測試。
選型重點：實際波長範圍、解析度與靈敏度需依機身配置與校正狀態確認。評估 MP1763C 時，建議同步確認波長範圍、解析度、靈敏度、光纖介面、校正狀態與附件完整性。
採購與技術確認：弘燁科技可依目前庫存、附件組合、校正需求與交期，協助比對同級替代型號並整理可交付方案。
品牌與分類：品牌為 Anritsu，產品分類為 光通訊與光學量測。如需確認完整規格、附件、校正與交期，建議提供實際量測條件由 SMART 協助確認。
規格
主要規格與功能
MP1763C Pulse Pattern Generator（PPG）主要規格： 應用定位 ：高速邏輯／IC／數位系統之研發驗證與BERT測試訊號源 支援速率範圍 ：涵蓋 STM-0/STS-1～10GbE、STM-64/STS-192、OTU-2、4.25G Fibre Channel 輸出波形品質 ：高品質、低抖動碼型輸出（適用高速SerDes與光通訊壓力測試） Clock性能 ：內建 低FM/PM
Parallel Output （8路資料輸出） 選配 1/4 Parallel Output 或 1/4 Differential Output 輸出特性 ：Data / Clock 具 Complementary Outputs（互補輸出） Pattern Memory / Programmable Pattern ： 8 Mbit 可程式化
原廠英文說明
The MP1763C is used in combination with the MP1764C or MP1764D Error Detector for 12.5G BER testing. The amplitude of the clock and data signals can be varied from 0.25 to 2 Vp-p while the offset can be adjusted to within ±2 V so that the amplitude and the offset margin can be measured. The clock has a variable delay function so that time dependent characteristics or phase margins of the input clock and data can be measured. An M-series pseudorandom pattern representative of actual conditions or a programmable pattern can be selected as cell data. 1/8 parallel output is standard, and options are available for either 1/4 parallel output or 1/4 differential output. This is the industry's only 12.5G BERT system with differential inputs and ¼ differential outputs required for SAN market device applications. In addition, a 3.5 inch floppy disk drive is built in for storing preset data, enabling rapid measurements to be performed by simply pressing a key. A GPIB function is provided, enabling automatic or remote measurement via an external controller.