產品介紹
【弘燁科技】Anritsu MP1900A Signal Quality Analyzer 信號品質分析儀｜BERT 誤碼率測試
【弘燁科技 ‧ 專業高速介面 / BERT 測試儀器服務】
Anritsu MP1900A Signal Quality Analyzer 為高速介面訊號品質分析與 BERT 誤碼率測試平台，可依需求搭配 Pattern Generator、Error Detector、Jitter / Noise、Clock Recovery 等模組，進行高速傳輸鏈路之 BER 測試、眼圖與訊號品質驗證。
適用於 SERDES 高速介面、光通訊模組、資料中心互連、伺服器與高速背板等測試情境，常見於研發驗證、QA、產線 EOL / ATE 與相容性測試。
- 高速介面 BERT / 信號品質測試
- PAM4 / NRZ、PCI Express、USB、Thunderbolt、Ethernet 等高速序列介面驗證
- 可依測試需求搭配 PPG / ED / Jitter / Noise / Clock Recovery 等模組
- 支援全新 / 二手儀器買賣、租賃、出售、回收收購、維修保養與校驗校正
規格
原廠完整規格表 / Full Specifications
以下整理原廠完整規格表，供型號確認、規格比對與詢價確認使用。
| Item | Specification |
|---|---|
| LCD | 12.1-inch, WXGA 1280 x 800 |
| Remote Interface | GPIB, LAN |
| Module Slots | 8 |
| External Peripheral I/F | USB x6, VGA x1, HDMI x1 |
| OS | Windows Embedded Standard 7 |
| Power | 100V(ac) to 120V(ac)/200V(ac) to 240 V(ac) 50 Hz to60 Hz |
| Power Consumption | 1350 VA max. |
| Dimensions/Mass | 340 (W) x 222.5 (H) x 451 (D) mm/20 kg max. (excluding modules) |
| Item | Specification |
|---|---|
| No. of Channels | 2 |
| Insertion Loss | -3 dB |
| CMI | 0.1 GHz to 1 GHz/1 GHz to 6 GHz |
| DMI | 2 GHz to 10 GHz |
| White Noise | 10 MHz to 10 GHz |
| Crest Factor | >5 |
| Item | Specification |
|---|---|
| Operation Rate (PAM4/NRZ) | 2.4 Gbaud to 32.1/58.2/64.2 Gbaud (option selection) |
| No. of Channels | 1 |
| Output Amplitude | 70 mVp- to 800 mVp-p (Single-end) 140 mVp- to 1600 mVp-p (Differential) |
| Offset | -2 V to +3.3 V |
| Emphasis | 4 Tap, -20 to +20 dB |
| Channel Emulator | Generates waveform with insertion loss and simulates waveform with corrected insertion loss Set by loading S-Parameter file (S2 P, S4 P) |
| ISI | Simulates ISI generation waveform Set using loss (–8.00 to 8.00 dB) at CEI-specified Nyquist frequency Used in combination with channel board, such as J1800A/J1758A (optional accessories parts), or Noise Module MU195050A |
| Independently Variable PAM4 3 Eye | 20 to 50% (PAM4 Amplitude 0/3 level = 100%) |
| PAM4 Pattern | SSPRQ, PRBS13Q, PRBS31Q, RS-FEC, etc. |
| PAM4 Pattern Error Addition | MSB Error, LSB Error, LSB&MSB Error, RS-FEC Symbol Error |
| Tr/Tf (20 to 80%) | 8.5 ps (typ., NRZ) |
| Random Jitter | 170 fs rms (typ., NRZ) |
| I/O Connector | V (f) |
| Item | Specification |
|---|---|
| Operation Rates (PAM/NRZ) | 2.4 to either 32.1 Gbaud, or 58.2 (PAM4)/64.2 (NRZ) Gbaud (option selection) |
| No. of Channels | 1 |
| Input Amplitude | NRZ: ≤32.1G: 0.05 to 1.0 Vp-p; >32.1G: 0.1 to 1.0 Vp-p PAM4: ≤32.1G: 0.3 to 1.0 Vp-p; >32.1G: 0.4 to 1.0 Vp-p |
| Input Sensitivity (Eye Height) | NRZ: 19 mV @ 26.5625 Gbaud; 21 mV @ 53.125 Gbaud PAM4: 23 mV @ 26.5625 Gbaud; 36 mV @ 53.125 Gbaud |
| Clock Recovery (Option) | 2.4 to 32.1 Gbaud; 51 to 58.2 Gbaud |
| Equalizer (Option) | Low-frequency Equalizer (≤1 GHz, 2 dB typ.) + DFE (1.4 dB typ.) |
| PAM4 Patterns | SSPRQ, PRBS13Q, PRBS31Q, etc. |
| PAM4 Counter | MSB, LSB, Symbol 0 to 3 (Option) |
| Input Connector | V (f) |
| Item | Specification |
|---|---|
| Operation Bit Rate (NRZ) | 2.4 Gbit/s to 21 Gbit/s or 32.1 Gbit/s |
| No. of Channels | 1 or 2 |
| Output Amplitude | 0.1 Vp-p to 1.3 Vp-p (Single-end) 0.2 Vp-p to 2.6 Vp-p (Differential) |
| Emphasis | 10Tap |
| Channel Emulator | Normal： Emulates Insertion Loss using S-parameters Inverse： Performs De-Emphasis compensation for S-parameter Insertion Loss S-Parameter file: S2P,S4P |
| ISI | Emulates output for ISI using CEI-28G/25G Nyquist frequency loss setting Supports loss control in combination with J1758A ISI Board accessory Insertion Loss setting：1.5 to 25 dB, 0.01 dB step, Nyquist frequency 0 to 25 dB, 0.01 dB step, 1/2 Nyquist frequency
|
| Tr/Tf (20% – 80%) | 12 ps (typ.) |
| Random Jitter | 115 fs rms (typ.) |
| PCIe and USB Link Training | Supported（MX183000A-PL021/PL022/PL025） |
| Output Connector | K (f) |
| Item | Specification |
|---|---|
| Operation Bit Rate (NRZ) | 2.4 Gbit/s to 21 Gbit/s or 32.1 Gbit/s |
| No. of Channels | 1 or 2 |
| Input Amplitude | 0.05 Vp-p to 1.0 Vp-p (Single-End) 0.1 Vp-p to 2.0 Vp-p (Differential) |
| Input Sensitivity (Eye Height) | 15 mV (Eye Height 28.1 Gbit/s) 30 mV/Eye（28.1 Gbaud, PRBS15, PAM4） |
| CTLE | Peak Frequency 14, 8, 4 GHz Gain 0 to –12 dB |
| Clock Recovery | Yes, SSC support |
| PCIe and USB Link Training | Supported（MX183000A-PL021/PL022/PL025） |
| Ouput Connector | K (f) |
儀器介紹
原廠應用圖與測試架構
以下依 MP1900A 舊站「儀器介紹」內容整理，保留 PAM4 / NRZ 測試解決方案圖與主要應用說明，方便工程選型、模組配置與測試架構討論。
PAM4 Test Solution
512 Gbit/s max. transmission capacity
PAM4 PPG/ED (MU196020A/MU196040A)Baud rate of 2.4 to 64.2 Gbaud*1Multichannel Scalability 4ch PAM4/NRZ NEWHigh-speed Tr/Tf of 8.5 ps (20 to 80%)Low Intrinsic Jitter output of random Jitter 170 fs rms (typ.)Low noise and low distortion high-quality data output4Tap Emphasis (20-dB Range)ISI adjustment function NEWFEC pattern generation NEWStressed margin BER < E-12*2Built-in Clock RecoveryPAM4 pattern editor and symbol error measurement
Jitter Addition, Jitter Tolerance measurement functions (SJ/RJ/BUJ/SSC)
Voltage Noise Addition function (Common/Differential/White Noise)
Jitter Tolerance measurement using DUT BER counter function NEW
*1: Future support for ED (Over 32.1G)*2: At PAM4 Stressed waveform input refer to CEI
PAM4 Solution (Max. 64 Gbaud at 1CH)
High-Speed Serial BUS Test Solution (PCI Express, USB, Thunderbolt)
512 Gbit/s max. transmission capacity, one main frame expandable to 16ch (filling 8 slots with 32 Gbit/s 2 ch PPG)
All-in-one support for both high-speed Ethernet and PCI Express interface tests
New wideband 32 Gbit/s SI PPG/ED (MU195020A/MU195040A)
Bit rate of 2.4 Gbit/s to 32.1 Gbit/s
NRZ/PAM4 Support
10Tap Emphasis
Variable ISI function
Multi-band CTLE (8 Gbit/s, 16 Gbit/s, 28 Gbit/s bandwidths)
Low Intrinsic Jitter output of random Jitter 115 fs rms (typ.)
High-sensitivity Data input of 15 mV typ. (EYE Height)
1ch/2ch Selection
PCI Express Link Training, LTSSM analysis (using MU195020A/MU195040A/MX183000A-PL021)
USB Express Link Training, LTSSM analysis (using MU195020A/MU195040A/MX183000A-PL022)
Jitter Addition, Jitter Tolerance measurement functions (SJ/RJ/BUJ/SSC, using MU181500B/MX183000A-PL001)
Voltage Noise Addition function (Common/Differential/White Noise, using MU195020A/MU195050A)
NRZ Solution (Max. 32 Gbit/s at 1ch)
