產品介紹
Anritsu MP2110A BERTWave(高速誤碼率測試儀 / BERT)
支援型號:MP2110A
產品定位與應用價值
Anritsu MP2110A BERTWave 為高速序列訊號測試平台,整合 Pattern Generator / Error Detector,可進行 BER(Bit Error Rate)誤碼率量測、時序 / 抖動品質評估與接收端靈敏度驗證,適用於高速 SerDes 介面、通訊模組、背板 / 線材通道等設計與製造測試需求。可協助工程師快速完成 link bring-up、容限測試、錯誤分析與可靠度驗證,常用於研發除錯、量產抽測與一致性檢驗等應用場景。
常見應用,適用於:高速 Serial Data / SerDes 介面 BER 量測與驗證 Jitter(抖動)與時序品質評估、Margin 測試 Receiver Sensitivity(接收端靈敏度)與容限驗證 背板 / 線材 / 連接器通道測試、系統整合 Bring-up 通訊元件 / 模組研發、產線測試與品質控管
我們提供
- 儀器功能檢測與校驗
- 現貨/客訂均可(依需求與配件供貨)
- 高價回收收購儀器
- FAE 工程師協助測試架構規劃與治具 / 線材建議
歡迎來電諮詢,提供現貨查詢、快速報價、租賃方案與交期安排,協助您快速導入高速通訊測試需求。
規格
主要規格與功能
- Anritsu MP2110A BERTWave 規格/特色 All-in-One:內建 4ch
- BERT + 4ch Sampling Oscilloscope(取樣示波器) 高速量測:250 ksamples/s,約 5 秒完成 1 Msamples 取樣 高靈敏度(光):–15
dBm(typ., SMF) 寬頻寬:35
GHz(Optical, SMF)、25
GHz(Optical, MMF)、40
GHz(Electrical) 低抖動:200
- fs rms(Sampling Oscilloscope, typ.) 支援 NRZ / PAM4 信號分析,可支援 PAM4 最高 53-Gbaud 分析 內建 26/53-Gbaud
Clock Recovery Unit(CRU),支援 NRZ 與
PAM4 NRZ Jitter component analysis(抖動成分分析) BERT:低抖動
PPG 600 fs rms(typ.) BERT:高靈敏度
Error Detector(ED)25 mV(typ.) 內建 PC 平台,穩定高效、縮短測試時間、提升良率並降低建置成本
儀器介紹
For 10G to 800G Multichannel Optical Module/Device R&D and Manufacturing
- Customized built-in 4ch sampling oscilloscope and 4ch BERT
- Fast measurement and high performance shorten test times, improve yields, and cut capital infrastructure costs
- Sampling Oscilloscope
- Fast: 250 ksamples/s to measure 1 Msamples in about 5 s
- High Sensitivity: –15 dBm (typ., SMF)
- Wide bandwidth: 35 GHz (optical, SMF), 25 GHz (optical, MMF), 40 GHz (electrical)
- Low Jitter: 200 fs rms (typ.)
- Both NRZ and PAM4 signal analysis, Supports 53-Gbaud analysis with PAM4
- Built-in 26/53 Gbaud Clock Recovery Unit (CRU) for both NRZ and PAM4
- NRZ Jitter component analysis
- BERT
- Low-Jitter PPG: 600 fs rms (typ.)
- High-sensitivity ED: 25 mV (typ.)
- Sampling Oscilloscope
- Built-in PC for stable fast performance