Test & measurement · Infrared sensing+886 2 8797 1799
Product Information

Rohde & Schwarz LCX200 LCR Meter

Technical product information for engineering, procurement, rental and service inquiries.

Product image

Rohde & Schwarz LCX200 LCR Meter
Product Overview

Rohde & Schwarz LCX200 LCR Meter

The R&S LCX200 measures inductance, capacitance, resistance and impedance for component development, incoming inspection and production test. The base AC frequency range is 4 Hz to 500 kHz, with DC measurement also available. Confirm test level, bias and fixture compatibility for the actual component.

Key specifications and configuration

  • Base range: DC measurement and 4 Hz to 500 kHz AC.
  • LCX-K201 extends the LCX200 to 1 MHz; LCX-K210 extends it to 10 MHz with 100 Ω source impedance. The 10 Ω mode is limited to 1 MHz.
  • Basic impedance accuracy ±0.05% and phase accuracy ±0.03° apply under specified frequency, level, impedance and environmental conditions; they are not all-range guarantees.
  • Selectable 100 Ω / 10 Ω source impedance. Available frequency and stimulus level depend on the selected mode.
  • Up to 10 Vrms applies only under specified conditions, including 100 Ω source impedance, no load and frequencies ≤1 MHz. Other modes, cables and higher frequencies have lower limits.
  • Internal DC voltage bias 0–10 V is standard. LCX-K108 current bias up to 200 mA is optional. External bias input 0–40 V requires an external source.
  • USB and LAN; optional NG-B105 GPIB, LCX-K106 advanced analysis and LCX-K107 digital I/O / binning. Select fixtures for component package and frequency.
  • Based on datasheet Version 04.00: specifications include a +23 °C (−3/+7 °C) environment and 60-minute warm-up. Low-level operation has firmware / serial-number conditions. Confirm options, accessories, calibration and lead time with SMART.

Manufacturer reference

Rohde & Schwarz LCR / Impedance

Typical applications

  • Component characterization
  • Fixture and test frequency review
  • Laboratory or QA measurement

Information for quotation

  • Measurement frequency, impedance range and fixture type
  • Exact model number and option code
  • Required accessories or fixtures
  • Quantity and target lead time
  • Calibration or service requirement
Brand × Category navigation
Product images and datasheets
Technical inquiry support

Datasheets and technical files

Contact SMART to confirm the latest specifications, available options, accessories, calibration and lead time.