Product Overview
Rohde & Schwarz LCX100 LCR Meter
The R&S LCX100 measures inductance, capacitance, resistance and impedance for component development, incoming inspection and production test. The base AC frequency range is 4 Hz to 300 kHz, with DC measurement also available. Confirm test level, bias and fixture compatibility for the actual component.
Key specifications and configuration
- Base range: DC measurement and 4 Hz to 300 kHz AC.
- LCX100 covers AC frequencies up to 300 kHz. Evaluate LCX200 and its options when higher frequencies are required.
- Basic impedance accuracy ±0.05% and phase accuracy ±0.03° apply under specified frequency, level, impedance and environmental conditions; they are not all-range guarantees.
- Selectable 100 Ω / 10 Ω source impedance. Available frequency and stimulus level depend on the selected mode.
- Up to 10 Vrms applies only under specified conditions, including 100 Ω source impedance, no load and frequencies ≤1 MHz. Other modes, cables and higher frequencies have lower limits.
- Internal DC voltage bias 0–10 V is standard. LCX-K108 current bias up to 200 mA is optional. External bias input 0–40 V requires an external source.
- USB and LAN; optional NG-B105 GPIB, LCX-K106 advanced analysis and LCX-K107 digital I/O / binning. Select fixtures for component package and frequency.
- Based on datasheet Version 04.00: specifications include a +23 °C (−3/+7 °C) environment and 60-minute warm-up. Low-level operation has firmware / serial-number conditions. Confirm options, accessories, calibration and lead time with SMART.
Rohde & Schwarz LCR / Impedance
Typical applications
- Component characterization
- Fixture and test frequency review
- Laboratory or QA measurement
Information for quotation
- Measurement frequency, impedance range and fixture type
- Exact model number and option code
- Required accessories or fixtures
- Quantity and target lead time
- Calibration or service requirement
Brand × Category navigation
Product images and datasheets
Technical inquiry support
Datasheets and technical files
Contact SMART to confirm the latest specifications, available options, accessories, calibration and lead time.
