產品介紹
產品定位與應用：TESEQ NSG438 為針對車用測試優化的 30 kV 旗艦靜電放電模擬器，支援空氣與接觸放電、可更換放電網路、單次／連續／重複／隨機操作與多種 ISO 10605 網路選配。
選型確認重點：評估 NSG438 時，建議同步確認測試規範、放電網路、放電尖端、接地方式、附件、校正狀態與交期。
採購與技術確認：弘燁科技可依實際測試條件、設備狀態與附件組合，協助確認可交付配置及同級替代方案。
規格
規格重點
| 標準放電網路 | 150 pF／330 Ohm，符合 IEC／EN 61000-4-2 與 ISO 10605 |
|---|---|
| 選配 ISO 網路 | 330 pF／330 Ohm、150 pF／2 kOhm、330 pF／2 kOhm |
| 放電電壓 | 空氣／接觸放電皆為 200 V 至 30 kV，100 V 步進 |
| 充電電壓測量 | 穩定後準確度優於 ±5% |
| 極性與模式 | 正／負／自動切換；單次、重複、隨機或連續 |
| 重複設定 | 0.5、1、5、10、20、25 Hz；或 0.04 至 300 秒自由設定 |
| 顯示與計數 | LCD 顯示充電電壓、擊穿事件、極性、模式、網路與電池；計數 0 至 9,999 |
| 重量與環境 | 放電槍約 1.2 kg，基座約 6.5 kg；+5 至 +40°C，20 至 80% RH |
典型應用
- 車用電子 ESD 抗擾度測試
- IEC／EN 61000-4-2 與 ISO 10605 測試規劃
- OEM 規範、放電網路與尖端配置評估
- 研發實驗室、認證前與量產品保驗證
檔案下載
原廠英文說明
Product positioning and application: The TESEQ NSG438 is a 30 kV flagship ESD simulator optimized for automotive testing, with air and contact discharge, interchangeable discharge networks, and single, continuous, repetitive and random operating modes.Configuration review: Confirm the test standard, discharge network, discharge tip, grounding, accessories, calibration status and delivery requirement before quotation. SMART can help compare available configurations.Key SpecificationsStandard pulse network150 pF / 330 Ohm per IEC/EN 61000-4-2 and ISO 10605Optional ISO networks330 pF / 330 Ohm, 150 pF / 2 kOhm and 330 pF / 2 kOhmDischarge voltageAir and contact discharge: 200 V to 30 kV in 100 V stepsCharging voltage measurementBetter than +/-5% accuracy when stabilizedPolarity and modesPositive, negative or automatic change; single, repetitive, random or continuousRepetition settings0.5, 1, 5, 10, 20 and 25 Hz; or freely selectable from 0.04 to 300 secondsDisplay and counterLCD for charging voltage, breakdown event, polarity, mode, network and battery; counter 0 to 9,999Weight and environmentDischarge pistol approximately 1.2 kg, base station approximately 6.5 kg; +5 to +40 C, 20 to 80% RHTypical ApplicationsAutomotive-electronics ESD immunity testingIEC/EN 61000-4-2 and ISO 10605 test planningOEM requirement, discharge-network and tip configuration reviewR&D lab, pre-compliance and production-QA validation