產品介紹
產品定位：Anritsu MS9740B 光學頻譜分析儀｜Optical Spectrum Analyzer (OSA)｜MS9740B 屬於向量網路分析與射頻微波元件量測設備，可用於S 參數、回波損耗、增益／損耗、濾波器、放大器、天線、線纜與 RF 模組驗證。
選型重點：實際量測範圍、精度與可用功能需依機身選配、附件與校正狀態確認。評估 MS9740B 時，建議同步確認頻率範圍、埠數、動態範圍、校正件、測試治具、Bias Tee、衰減器與選配功能。
採購與技術確認：弘燁科技可依目前庫存、附件組合、校正需求與交期，協助比對同級替代型號並整理可交付方案。
品牌與分類：品牌為 Anritsu，產品分類為 射頻微波儀器。如需確認完整規格、附件、校正與交期，建議提供實際量測條件由 SMART 協助確認。
規格
原廠完整規格表 / Full Specifications
以下整理原廠完整規格表，供型號確認、規格比對與詢價確認使用。
SpecificationsDetails
SM fiber (ITU-T G.652), 50μm/125μm GI fiber SM fiber (ITU-T G.652), 50μm/125μm GI fiber, 62.5μm/125μm GI fiber
User replaceable: FC, SC, ST, DIN
Wavelength measurement range
±20 pm (1520 nm to 1620 nm, Resolution: 0.03 nm to 0.2 nm)*2 ±100 pm (1520 nm to 1620 nm, Resolution: 0.5 nm, 1.0 nm)*2
±50 pm (1530 nm to 1570 nm, Resolution: 0.07 nm to 0.2 nm)*2 ±100 pm (1530 nm to 1570 nm, Resolution: 0.5 nm, 1.0 nm)*2
0.03, 0.05, 0.07, 0.1, 0.2, 0.5, 1.0 nm (RBW 3 dB transparent bandwidth) 0.07, 0.1, 0.2, 0.5, 1.0 nm (RBW 3 dB transparent bandwidth)
| High dynamic range | 70 dB (±1 nm from peak wavelength), 60 dB (±0.4 nm from peak wavelength), 42 dB (±0.2 nm from peak wavelength) |
|---|---|
| Normal dynamic range | 62 dB (±1 nm from peak wavelength), 58 dB (±0.4 nm from peak wavelength), 42 dB (±0.2 nm from peak wavelength) |
| [Wavelength | 1550 nm, Resolution: 0.05 nm, Optical Att: Off, 20° to 30°C] |
| High dynamic range | 70 dB (±1 nm from peak wavelength, 20° to 30°C), 60 dB (±0.5 nm from peak wavelength, 20° to 30°C) |
65 dB (±1 nm from peak wavelength, 5° to 45°C), 55 dB (±0.5 nm from peak wavelength, 5° to 45°C) Normal dynamic range: 62 dB (±1 nm from peak wavelength, 20° to 30°C), 58 dB (±0.5 nm from peak wavelength, 20° to 30°C) 57 dB (±1 nm from peak wavelength, 5° to 45°C), 53 dB (±0.5 nm from peak wavelength, 5° to 45°C)
[Wavelength: 1550 nm, Resolution: 0.07 nm, using SM fiber, Optical Att: Off]
| Sweep time | ≤0.2 s (span: 5 nm, Resolution: 0.1 nm), ≤0.3 s (span: 500 nm) |
|---|---|
| [VBW | 10 kHz, Normal dynamic range, center 1550 nm (span: 5 nm), 1200 nm (span: 500 nm), sweep start to stop, no optical input, sampling point: ≤501] |
| Sweep time | 0.35 s / 30 nm (typ.) |
| [VBW | 1 kHz- Fast, dynamic range, center 1550 nm, Resolution: 0.1 nm, sweep start to stop, optical input -10 dBm, sampling point: 1001] |
| Sweep time | 1,65 s / 30 nm (typ.) |
| [VBW | 200 Hz-Fast, dynamic range, center 1550 nm, Resolution: 0.1 nm, sweep start to stop, optical input -10 dBm, sampling point: 1001] |
±1.4 dB (MS9740B), ±1.8 dB (with MS9740B-009 installed) Using SM fiber and DFB-LD with 1550 nm wavelength at 10 dBm peak power input, with 45 dB max SMSR and no change in polarization conditions Pulse conditions: 5 kHz min repetition frequency and 1% min Duty
Pulse Mode enabled, 1 kHz VBW, 0.1 nm Setting Resolution, 10 nm max span, 501 sampling points, at 23°C ±5°C
426 (W) × 177 (H) × 350 (D) mm (excluding projections) ≤15.0 kg (without option)
原廠英文說明
The benchtop Optical Spectrum Analyzer MS9740B features wide dynamic range, high resolution, and fast sweep speeds over a wavelength range of 600 nm to 1750 nm. It supports multimode fiber input and is ideal for manufacturing and evaluating 850-nm band VCSEL modules. As well as keeping the same functions and performance as its predecessor, the MS9740B slashes measurement processing times by up to half*1 while overcoming problems of decreased measurement sensitivity caused by increased processing speed. Moreover, it retains optical active device (LD-Module, DF-LD, FP-LD, LED, PMD, WDM, Opt Amp, and WDM Filter) measurement menu screens for evaluating devices. It supports all-at-once measurements of key evaluation items, such as optical center wavelength, level, OSNR, spectrum width, etc., and displays these results at one screen.