產品介紹
產品定位：Tektronix MSO70404C 高頻寬混合訊號示波器｜Digital & Mixed Signal Oscilloscope 屬於向量網路分析與射頻微波元件量測設備，可用於S 參數、回波損耗、增益／損耗、濾波器、放大器、天線、線纜與 RF 模組驗證。
選型重點：實際量測範圍、精度與可用功能需依機身選配、附件與校正狀態確認。評估 MSO70404C 時，建議同步確認頻率範圍、埠數、動態範圍、校正件、測試治具、Bias Tee、衰減器與選配功能。
採購與技術確認：弘燁科技可依目前庫存、附件組合、校正需求與交期，協助比對同級替代型號並整理可交付方案。
品牌與分類：品牌為 Tektronix，產品分類為 射頻微波儀器。如需確認完整規格、附件、校正與交期，建議提供實際量測條件由 SMART 協助確認。
規格
主要規格與效能（ Core Specifications ）
系列定位與量測能力（ System Performance & Measurement Capability ）
- 由 Tektronix 推出之高階 Digital & Mixed Signal Oscilloscope 平台
- 提供優異訊號完整性與高信噪比，真實還原高速波形細節
- 支援 Pinpoint® Triggering 精準擷取複雜問題訊號
- Visual Trigger 可視化條件設定，快速鎖定異常事件
- Search & Mark 波形與匯流排事件自動搜尋功能
- 支援多種高速序列通訊自動觸發與解碼分析
頻寬與通道配置（ Bandwidth & Channel Configuration ）
| • Analog Channels（類比通道） | 4 Channels |
|---|---|
| • Digital Channels（MSO models） | 16 Channels |
| • Analog Bandwidth（-3 dB） | 4 GHz（Hardware & DSP selectable） |
取樣效能（ Sampling Performance ）
| • Sample Rate（1–2 Channels） | 25 GS/s（Max up to 50 GS/s） |
|---|---|
| • Sample Rate（3–4 Channels） | 25 GS/s |
| • Sample Rate（ET/IT Mode） | 5 TS/s |
| • Timing Resolution | 40 ps（25 GS/s） |
| • ET/IT Mode Resolution | 200 fs |
| • Standard Record Length | 31.25 Mpts / Channel |
|---|---|
| • MSO70000 Series Standard | 62.5 Mpts / Channel |
| • Optional 5XL | 62.5 Mpts / Channel |
| • Optional 10XL | 125 Mpts / Channel |
高速長時間擷取能力（ Capture Duration at Max Sample Rate ）
| • Standard | 1.25 ms（DPO） / 2.5 ms（MSO） |
|---|---|
| • Optional 5XL | 2.5 ms |
| • Optional 10XL | 5.0 ms |
垂直雜訊與抖動效能（ Noise & Jitter Performance ）
- Vertical Noise：0.28% of full scale
- Delta Time Accuracy（RMS）：1.48 ps
- Jitter Noise Floor（typical, BWE enabled）：340 fs
進階分析與除錯功能（ Advanced Analysis & Debug ）
- Automated Serial Analysis 支援：
PCIe、8b/10b、I2C、SPI、CAN、LIN、USB 2.0、HSIC、MIL-STD-1553B、MIPI® C-PHY / D-PHY / M-PHY
- Memory、Advanced Jitter、Power、Wideband RF 選配分析模組
探棒與介面整合（ Probe & Connectivity System ）
支援 Active / Differential / Current Probes 自動辨識與量測單位設定
- 高效能 TriMode™ 與 Logic Probe 系統（最高 2.5 GHz 數位頻寬）
- USB 2.0（Front & Rear）資料儲存與裝置連接
- Integrated Ethernet 網路控制
- Video Out 外接螢幕輸出
- 9-inch WVGA Widescreen Color Display
高速系統應用支援（ High-Speed Application Support ）
DPO70404C, MSO70404C
10% to 90%: 98 ps 20% to 80%: 68 ps
31.25 M 62.5 M (MSO70000 Series) Record length (each channel, Opt. 5XL, DPO70000 series)
62.5 M Record length (each channel, Opt. 10XL)
Record length (each channel, Opt. 20XL)
Record length (each channel, Opt. 50XL)
1.25 ms 2.5 ms (MSO70000 Series) Duration at highest sample rate (Opt. 5XL, DPO70000 series) 2.5 ms
Duration at highest sample rate (Opt. 10XL) 5.0 ms Duration at highest sample rate (Opt. 20XL)
Duration at highest sample rate (Opt. 50XL)
0.28%
Delta time measurement accuracy (RMS over1.48 ps
原廠英文說明
Key features
Superior signal integrity and excellent signal-to-noise ratio – observe the truest representation of your waveform Pinpoint® triggering – minimize time spent trying to acquire problem signals for efficient troubleshooting and shortened debug time Visual Trigger – precisely qualify triggers and find unique events in complex waveforms
Search and Mark – provides waveform or serial bus pattern matching and software triggers for signals of interest Automated Serial Analysis options for PCI Express, 8b/10b encoded serial data, I2C, SPI, CAN, LIN, FlexRay, RS-232/422/485/UART, USB 2.0, HSIC, MIL-STD-1553B, and MIPI® C-PHY, D-PHY and M-PHY P7700, P7600, and P7500 TriMode™ probing system – perfectly matched signal connectivity, with calibration to probe tip
P6780, P6750, and P6717A high-performance 17-channel logic probes with bandwidths up to 2.5 GHz for connections to today's fast digital signals (MSO70000 Series only)
Connectivity
USB 2.0 host port on both the front panel and rear panel for quick and easy data storage, printing, and connecting a USB keyboard Integrated 10/100 Ethernet port for network connection and Video Out port to export the oscilloscope display to a monitor or projector
Application support
High-speed serial industry standards compliance
SignalVu® RF and vector signal analysis
DDR memory bus analysis
Applications
Design verification including signal integrity, jitter, and timing analysis Design characterization for high-speed, sophisticated designs Certification testing of serial data streams for industry standards
Memory bus analysis and debug
Prototype turn-on and power supply verification Research and investigation of transient phenomena
Production testing of complex systems
Spectral analysis of transient or wide-bandwidth RF signals