產品介紹
單輸出可程式直流電源(Single Output Programmable DC Power Supply)
輸出功率:80–100 W(依型號)
低雜訊輸出(Low-noise output)
線性輸出調節(Linear output regulation),提升供電穩定度與量測可信度
6631B:8 V / 10 A
6632B:20 V / 5 A
6633B:50 V / 2 A
6634B:100 V / 1 A
6631B:0.3 mV rms / 3 mV p-p
6632B:0.3 mV rms / 3 mV p-p
6633B:0.5 mV rms / 3 mV p-p
6634B:0.5 mV rms / 3 mV p-p
6631B:2 mV / 2 mA
6632B:2 mV / 1 mA
6633B:4 mV / 1 mA
6634B:5 mV / 1 mA
6631B:2 mV / 2.5 mA
6632B:5 mV / 1.25 mA
6633B:12.5 mV / 0.5 mA
6634B:25 mV / 0.25 mA
高速程控(High-speed programming):2 ms
Fast mode:400 µs
支援 電壓/電流量測回讀(Measured V & I Readback)
可透過 GPIB 進行精準回讀與自動化測試整合
GPIB(SCPI)
RS-232
支援自動化測試、ATE 系統整合、遠端控制與資料紀錄
Keysight 663xB series datasheet:
規格
儀器規格(Instrument Specifications)
輸出形式
-
單輸出可程式直流電源(Single Output Programmable DC Power Supply)
-
輸出功率:80–100 W(依型號)
-
低雜訊輸出(Low-noise output)
-
線性輸出調節(Linear output regulation),提升供電穩定度與量測可信度
最大輸出(依型號)
-
6631B:8 V / 10 A
-
6632B:20 V / 5 A
-
6633B:50 V / 2 A
-
6634B:100 V / 1 A
紋波與雜訊(Ripple & Noise, rms / p-p)
-
6631B:0.3 mV rms / 3 mV p-p
-
6632B:0.3 mV rms / 3 mV p-p
-
6633B:0.5 mV rms / 3 mV p-p
-
6634B:0.5 mV rms / 3 mV p-p
負載調節(Load Regulation)
-
6631B:2 mV / 2 mA
-
6632B:2 mV / 1 mA
-
6633B:4 mV / 1 mA
-
6634B:5 mV / 1 mA
程控解析度(Programming Resolution)
-
6631B:2 mV / 2.5 mA
-
6632B:5 mV / 1.25 mA
-
6633B:12.5 mV / 0.5 mA
-
6634B:25 mV / 0.25 mA
程控速度與回讀(Speed & Readback)
-
高速程控(High-speed programming):2 ms
-
Fast mode:400 µs
-
支援 電壓/電流量測回讀(Measured V & I Readback)
-
可透過 GPIB 進行精準回讀與自動化測試整合
介面與控制(Interface)
-
GPIB(SCPI)
-
RS-232
-
支援自動化測試、ATE 系統整合、遠端控制與資料紀錄
| 6631B | 6632B | 6633B | 6634B | |
|---|---|---|---|---|
| Maximum Output | 8 V / 10 A | 20 V / 5 A | 50 V / 2 A | 100 V / 1 A |
| Ripple & Noise (rms/p-p) | 0.3 / 3 mV | 0.3 / 3 mV | 0.5 / 3 mV | 0.5 / 3 mV |
| Load Regulation | 2 mV / 2 mA | 2 mV / 1 mA | 4 mV / 1 mA | 5 mV / 1 mA |
| Programming Resolution | 2 mV / 2.5 mA | 5 mV / 1.25 mA | 12.5 mV / 0.5 mA | 25 mV / 0.25 mA |
儀器介紹
The 6630 series of linear-regulated 80-100 W DC power supplies is designed to maximize the throughput of DUTs through the manufacturing test process. Both programming and measurement are optimized forspeed. The active downprogrammer can sink up to the full rated current of the power supply, which quickly brings the power supply output to zero volts.
The 6630B Series offers many advanced programmable features including stored states and status reporting. Programming is done using industry standard SCPI commands via the GPIB or RS-232. Test system integration is further simplified by using the VXIPlug&Play drivers. The optional relays simplify system design and troubleshooting.