首頁
>
儀器類別
>
>
Keysight N9040B UXA Signal Analyzer
儀器類別
Keysight N9040B UXA Signal Analyzer
- 2 Hz to 8.4, 13.6, 26.5, 44 or 50 GHz (Up to 1.1 THz with external mixers)
- Analysis Bandwidth: 25 MHz (standard), up to 1 GHz
- Displayed Average Noise Level (DANL): -174 dBm at 2 GHz with preamplifier and Noise Floor Extension on
- Third-order Intermodulation (TOI) Distortion: +23 dBm at 2 GHz
- Phase Noise (10 kHz offset): -136 dBc/Hz at 1 GHz; -126 dBc/Hz at 10 GHz
- Amplitude Accuracy: ±0.16 dB
- Spurious-free Dynamic Range (SFDR): -78 dBc nominal over 510 MHz bandwidth
產品介紹
- 儀器介紹
- 儀器規格
- 檔案下載
The ultimate performance of our UXA signal analyzers lets you characterize today’s most challenging signals — fast-hopping, wideband, transient — in 5G, 802.11ax/ay, satellite, radar, electronic warfare, and more. You will be able to fully understand the purity of your design with industry-leading phase noise and wide spurious-free dynamic range.
- Get wider (up to 1 GHz), deeper views of your most challenging signals
- Measure the spectral purity of your design with industry-leading phase noise and 78 dBc spurious-free dynamic range across 510 MHz bandwidth
- Extend RF input frequency up to 110 GHz with Keysight smart mixers and up to terahertz frequencies with third- party solutions
- Capture intermittent signals with gap-free, real-time spectrum analysis
- Capture lower-level spurious signals with an improved DANL low noise path
- See more and take your design farther with the 14.1-inch screen
| Frequency Range | |
| N9040B-508 | Frequency range, 2 Hz to 8.4 GHz |
| N9040B-513 | Frequency range, 2 Hz to 13.6 GHz |
| N9040B-526 | Frequency range, 2 Hz to 26.5 GHz |
| N9040B-544 | Frequency range, 2 Hz to 44 GHz |
| N9040B-550 | Frequency range, 2 Hz to 50 GHz |
| Connector Options | |
| N9040B-ALV | Auxiliary Log Video Output |
| N9040B-C35 | Connector, RF Input, 3.5 mm, Male |
| N9040B-CRP | Connector, Programmable Rear IF Output |
| N9040B-YAV | Y-Axis Output |
| Preamplifier | |
| N9040B-P08 | Preamplifier, 100 KHz-8.4 GHz |
| N9040B-P13 | Preamplifier, 100 KHz- 13.6 GHz |
| N9040B-P26 | Preamplifier, 100 KHz-26.5 GHz |
| N9040B-P44 | Preamplifier, 100 KHz- 44 GHz |
| N9040B-P50 | Preamplifier, 100 KHz- 50 GHz |
| Bandwidth | |
| N9040B-B2X | Analysis bandwidth, 255 MHz |
| N9040B-B5X | Analysis bandwidth, 510 MHz |
| N9040B-B25 | Analysis bandwidth, 25 MHz |
| N9040B-B40 | Analysis bandwidth, 40 MHz |
| N9040B-H1G | Analysis bandwidth, 1 GHz |
| N9040B-EA3 | Electronic Attenuator, 3.6 GHz |
| N9040B-RTS | Real-Time Wideband I/Q Data Streaming |
| N9040B-A6J | ANSI Z540 Compliant Calibration |
| N9040B-UK6 | Commercial Calibration Certificate with Test Data |
| N9040B-SSD | Additional Removable Solid State Drive |