首頁
>
儀器類別
>
>
Keysight N9030B PXA Signal Analyzer
儀器類別
Keysight N9030B PXA Signal Analyzer
- 2 Hz to 6, 8.4, 13.6, 26.5, 32, 44 or 50 GHz (Up to 1.1 THz with external mixers)
- Analysis Bandwidth: 25 MHz (standard), up to 510 MHz
- Displayed Average Noise Level (DANL): -174 dBm at 2 GHz with preamplifier and Noise Floor Extension on
- Third-order Intermodulation (TOI) Distortion: +23 dBm at 2 GHz
- Phase Noise (10 kHz offset): -136 dBc/Hz at 1 GHz; -124 dBc/Hz at 10 GHz
- Amplitude Accuracy: ±0.19 dB
- Spurious-free Dynamic Range (SFDR): -78 dBc nominal over 510 MHz bandwidth
產品介紹
- 儀器介紹
- 儀器規格
- 檔案下載
PXA signal analyzers are ideally suited for high-performance research and development (R&D) applications in aerospace/defense and commercial wireless communications. The PXA analyzes signals over wider bandwidths, reduces measurement uncertainty, and reveals previously hidden signals with noise floor extension (NFE). Unravel complex signals through the PXA’s broad set of measurement applications and demodulation capabilities or add real-time spectrum analysis capabilities with an upgradeable option.
- Analyze more with a wide frequency range of 2 Hz to 50 GHz with up to 510 MHz analysis bandwidth
- See small signals in the presence of large ones with up to 75 dB of spurious-free dynamic range (SFDR)
- Extend the frequency up to 110 GHz with Keysight smart mixers
- Record, analyze, and simulate real-world scenarios with gap-free streaming up to 255 MHz
- Capture transient or intermittent signals with optional real-time spectrum analysis capabilities
- Meet stringent data security requirements with a removable solid-state drive and other optional features
| Frequency options | |||
| N9030B-503 | Frequency Range, 2 Hz to 3.6 GHz | ||
| N9030B-508 | Frequency Range, 2 Hz to 8.4 GHz | ||
| N9030B-513 | Frequency Range, 2 Hz to 13.6 GHz | ||
| N9030B-526 | Frequency Range, 2 Hz to 26.5 GHz | ||
| N9030B-544 | Frequency Range, 2 Hz to 44 GHz | ||
| N9030B-550 | Frequency Range, 2 Hz to 50 GHz | ||
| Preamplifier options | |||
| N9030B-P03 | Preamplifier, 3.6 GHz | ||
| N9030B-P08 | Preamplifier, 8.4 GHz | ||
| N9030B-P13 | Preamplifier, 13.6 GHz | ||
| N9030B-P26 | Preamplifier, 26.5 GHz | ||
| N9030B-P44 | Preamplifier, 44 GHz | ||
| N9030B-P50 | Preamplifier, 50 GHz | ||
| Bandwidth options | |||
| N9030B-B2X | Analysis Bandwidth, 255 MHz | ||
| N9030B-B40 | Analysis Bandwidth, 40 MHz | ||
| N9030B-B1X | Analysis Bandwidth, 160 MHz | ||
| N9030B-B85 | Analysis Bandwidth, 85 MHz | ||
| N9030B-B5X | Analysis Bandwidth, 510 MHz | ||
| Performance Options | |||
| N9030B-EA3 | Electronic Attenuator, 3.6 GHz, Upgrade | ||
| N9030B-LNP | Low Noise Path | ||
| N9030B-MPB | Microwave Preselector Bypass | ||
| N9030B-RTS | Real-Time Wideband I/Q Data Streaming | ||
| N9030B-EP0 | Enhanced Phase Noise DDS LO | ||
| Baseband Inputs | |||
| N9030B-BBA | I/Q Baseband Inputs, Analog | ||
| Connector Options | |||
| N9030B-ALV | Auxiliary Log Video Output | ||
| N9030B-C35 | APC 3.5 mm Connector | ||
| N9030B-CR3 | Connector, Wideband IF Output Upgrade | ||
| N9030B-CRP | Connector Rear, Programmable IF Output | ||
| N9030B-YAV | Y-Axis Video Output | ||
| External Mixing | |||
| N9030B-EXM | External Mixing | ||
| Security – PC Features | |||
| N9030B-SSD | Additional Removable Solid State Drive | ||