首頁
>
儀器類別
>
>
Keysight N5249B N5241B N5242B PNA-X Network Analyzer
儀器類別
Keysight N5249B N5241B N5242B PNA-X Network Analyzer
- Frequency range from 10MHz to 8.5 / 13.5 / 26.5GHz
- 2 or 4 port configs available
- Output Power: 13dBm
- Up to 136dB dynamic range
- As low as 0.002dB rms trace noise
- USB, LAN and GPIB interfaces
產品介紹
- 儀器介紹
- 儀器規格
- 檔案下載
The PNA-X network analyzer is the world’s most integrated and flexible microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters.
Including two internal signal sources, S-parameter and noise receivers, pulse modulators and generators, a signal combiner, and set of switches and RF access points, the PNA-X architecture supports a broad range of linear and nonlinear measurements.
Replace an entire rack of equipment with a simplified testbed using one PNA-X network analyzer to test your device under test with only a single set of connections.
- Reduce test time with the widest range of single-connection measurement applications,
- Characterize linear and nonlinear devices using advanced error correction for unparalleled accuracy,
- Choose from the industry’s widest range of measurement applications for speed, accuracy, and ease of use in advanced RF test,
- Accelerate insights into component behavior using a multitouch display and intuitive user interface.
Hardware options
| N5242B-201 | 2-port, configurable test set | |
| N5242B-205 | 2-port, configurable test set, bias tees, low frequency extension | |
| N5242B-217 | 2-port, configurable test set, source attenuators, receiver attenuators | |
| N5242B-219 | 2-port, configurable test set, source attenuators, receiver attenuators, bias tees | |
| N5242B-222 | 2-port, configurable test set, source attenuators, receiver attenuators, second source, combiner, mechanical switches | |
| N5242B-224 | 2-port, configurable test set, source attenuators, receiver attenuators, bias tees, second source, combiner, mechanical switches | |
| N5242B-401 | 4-port, configurable test set, with second source | |
| N5242B-417 | 4-port, configurable test set, second source, source attenuators, receiver attenuators | |
| N5242B-419 | 4-port, configurable test set, second source, source attenuators, receiver attenuators, bias tees | |
| N5242B-422 | 4-port, configurable test set, second source, source attenuators, receiver attenuators, combiner, mechanical switches | |
| N5242B-423 | 4-port, configurable test set, second source, source attenuators, receiver attenuators, bias tees, combiner, mechanical switches | |
| N5242B-425 | 4-port, configurable test set, second source, attenuators, combiner, mechanical switches, bias tees, low frequency extension |
Additional hardware capability
| N5242B-020 | Add IF inputs | |
| N5242B-021 | Add pulse modulator to internal 1st source | |
| N5242B-022 | Add pulse modulator to internal 2nd source | |
| N5242B-029 | Add noise receiver to 26.5 GHz | |
| N5242B-UNY | Enhanced low phase noise performance | |
| N5242B-XSB | Third RF source up to 13.5 GHz |
Software with Subscription
| S93007B | Automatic fixture removal | |
| S93010B | Time-domain analysis | |
| S93011B | Enhanced time domain analysis with TDR | |
| S93015B | Real-time S-parameter and power measurement uncertainty | |
| S93025B | Basic pulsed-RF measurements | |
| S93026B | Advanced pulsed-RF measurements | |
| S93027B | Mechanical noise tuner control | |
| S93029B | Noise figure measurements with vector correction | |
| S930700B | Modulation distortion up to 8.5 GHz | |
| S930701B | Modulation distortion up to 13.5 GHz | |
| S930702B | Modulation distortion up to 26.5 GHz | |
| S930704B | Modulation distortion up to 43.5 GHz | |
| S930705B | Modulation distortion up to 50 GHz | |
| S930707B | Modulation distortion up to 70 GHz | |
| S93080B | Frequency-offset measurements | |
| S93082B | Scalar mixer/converter measurements | |
| S93083B | Vector and scalar mixer/converter measurements | |
| S93084B | Embedded-LO capability | |
| S93086B | Gain-compression measurements | |
| S93087B | Intermodulation distortion measurements | |
| S93088B | Source phase control | |
| S93089B | Differential and I/Q device measurements | |
| S930900B | Spectrum analysis up to 8.5 GHz | |
| S930901B | Spectrum analysis up to 13.5 GHz | |
| S930902B | Spectrum analysis up to 26.5 GHz | |
| S930909B | Spectrum analysis up to 90 GHz | |
| S93093B | Spectrum Analysis up to 125 GHz | |
| S93094B | Spectrum Analysis up to and beyond 125 GHz | |
| S93110B | Active hot parameters | |
| S93118B | Fast CW measurements | |
| S93460B | True-mode stimulus | |
| S93551B | N-port measurements | |
| S93898B | Built-in performance test software | |
| S94510B | Nonlinear component characterization | |
| S94511B | Nonlinear component characterization, restricted to 50 GHz | |
| S94514B | Nonlinear X-parameters | |
| S94518B | Nonlinear pulse envelope domain | |
| S94520B | Arbitrary load impedance, X-parameters | |
| S94521B | Arbitrary load control, X-parameters | |
| S94522B | Arbitrary load control, device characterization | |
| S930317B | Phase noise measurement up to 70 GHz | |
| S930321B | Phase noise measurement up to 125 GHz | |
| S93072B | Internal 6 GHz Arbitrary Waveform Generation | |
| S94601B | Device measurement eXpert - DMX | |
| S94602B | Limit assistant | |
| S93051B | IQ Data Bandwidth up to 4 GHz | |
| S94571B | Integrated Load-pull for Modulation Distortion application, restricted to 50 GHz | |
| S94572B | Wide-band Active Load-pull for Modulation Distortion | |
| S94573B | Wide-band Active Load-pull for Modulation Distortion, restricted to 50 GHz | |
| S94570B | Integrated Load-pull for Modulation Distortion application | |
| S930709B | Modulation Distortion up to 90 GHz | |
| S930712B | Modulation Distortion up to 125 GHz | |
| S930713B | Modulation Distortion up to and beyond 125 GHz |